Process: Prototype opto-mechanical low cost bending tape transducer 3D printed Matheus starting 2014-01-06 ending 2014-04-15

If you were logged in and working on this process, you would log your work on this page.

Outputs

Scheduled:

Prototype Material - Low cost tape sensor 1.00 Each due April 15, 2014

Work

Planned Work: (Requirements are ordered by due date)

Work - Technician experimental: 156.00 Time - Hours due April 15, 2014

prototype the low cost tape sensor, will be taken by Matheus

Taken by Matheus

Unplanned Work:

Work event: Work - Technician experimental 1.50 Time - Hours March 28, 2014 Done by Tibi

Worked on the fabrication of the low-cost tape sensor designed by Matheus. Polished fibers, assembled a sensor, found gluing solutions and tested the sensor. The sensor worked well, but we realized that the range was small. This was a sensor with glass tubes, and for large stretched the fiber comes out of the tube. The experiment was a partial success. We realized the limitations of this design - limited range. And we are now thinking about improvements.

Work event: Work - Technician experimental 24.00 Time - Hours March 4, 2014 Done by Matheus
Work event: Work - Technician experimental 24.00 Time - Hours Feb. 28, 2014 Done by Matheus
Work event: Work - R&D mechanics 24.00 Time - Hours Feb. 19, 2014 Done by Matheus
Work event: Work - R&D mechanics 24.00 Time - Hours Feb. 19, 2014 Done by Matheus
Work event: Work - R&D mechanics 1.00 Time - Hours Jan. 23, 2014 Done by Matheus
Work event: Work - R&D mechanics 24.00 Time - Hours Jan. 22, 2014 Done by Matheus
Work event: Work - Technician experimental 24.00 Time - Hours Jan. 13, 2014 Done by Matheus

Citations

Low cost tape sensor Study

Used the gap optimization study to tune the prototype

Consumable Inputs

Consumable - Molding materials: 0.50 Volume - L due Jan. 6, 2014

Used to fabricate the low-cost tape sensor.

Onhand: Platinum Silicone Rubber 15 ~ 0.75 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: Tibi ~ Manager: Tibi ~ Manager: Matheus
Consumed: 0.25 Volume - L March 12, 2014 by SENSORICA
Onhand: Platinum Silicone Rubber 30 ~ 0.75 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: Tibi ~ Manager: Tibi ~ Manager: Matheus
Consumed: 0.25 Volume - L March 12, 2014 by SENSORICA
Consumable - Optical fiber: 1.00 Length - Meter due Jan. 6, 2014
Onhand: 125/63.5 MM glass Corning Infinicor 300 ~ 18.08 Length - Meter
Onhand: PMMA 0.25 mm SK ~ 95.85 Length - Meter
Onhand: PMMA 0.5 mm SK ~ 97.88 Length - Meter
Onhand: PMMA 1mm CK ~ 19.49 Length - Meter

Usable Inputs

Lab (space): 100.00 Time - Hours due Jan. 6, 2014

All the work was performed at SENSORICA labs in Montreal

Onhand: Space - Frederic D's lab 200.00 Area - square meters
Onhand: Space - Makxim's lab 100.00 Area - square meters
Onhand: Space - Phil's lab 25.00 Area - square meters
Onhand: Space - SENSORICA Montreal lab 250.00 Area - square meters
Used: Space - SENSORICA Montreal lab 20.00 Time - Hours March 29, 2014 by SENSORICA
Used: Space - SENSORICA Montreal lab 20.00 Time - Hours March 15, 2014 by SENSORICA
Used: Space - SENSORICA Montreal lab 20.00 Time - Hours Feb. 28, 2014 by SENSORICA
Used: Space - SENSORICA Montreal lab 20.00 Time - Hours Feb. 15, 2014 by SENSORICA
Used: Space - SENSORICA Montreal lab 24.00 Time - Hours Jan. 31, 2014 by SENSORICA
Onhand: Space - SENSORICA Robotics lab 1000.00 Area - square meters
Part Electronic - Laser driver: 1.00 Each due Jan. 6, 2014
Onhand: Ic-wk2d 1.00 Each
Onhand: iC-WKL laser driver 6.00 Each
Onhand: iC-WKL laser driver with board 1.00 Each
Onhand: Laser driver Alibaba 1.00 Each
Onhand: Laser driver Frederique 1.00 Each
Used: Laser driver Frederique 10.00 Each March 14, 2014 by SENSORICA
Used: Laser driver Frederique 24.00 Each March 9, 2014 by SENSORICA
Onhand: Thorlabs laser driver 1.00 Each
Equipment - Microscope : 1.00 Each due Jan. 6, 2014
Onhand: Confocal Dilson's 1.00 Each
Onhand: Confocal Phil's 1.00 Each
Onhand: Inverted Phil 1.00 Each
Onhand: Microscope inverted Dilson 4.00 Each
Onhand: Stereo microscope - large Phil 1.00 Each
Onhand: Stereo microscope - large SENSORICA 1.00 Each
Used: Stereo microscope - large SENSORICA 1.00 Time - Hours March 28, 2014 by SENSORICA
Equipment - DAQ and controller: 1.00 Each due Jan. 6, 2014
Onhand: Arduino nano 1.00 Each
Onhand: Arduino UNO 2.00 Each
Onhand: DAQ and controller LabJack U3 HV 2.00 Each
Used: DAQ and controller LabJack U3 HV 24.00 Time - Hours March 12, 2014 by SENSORICA
Onhand: Phil's USB DAQ 1.00 Each
Used: Phil's USB DAQ 2.00 Time - Hours Feb. 12, 2014 by SENSORICA
Power supply: 1.00 Each due Jan. 6, 2014
Onhand: Hantek power supply USB 1.00 Each
Onhand: Power supply GQ 1.00 Each
Used: Power supply GQ 24.00 Time - Hours Jan. 23, 2014 by SENSORICA
Onhand: POWER SUPPLY WALL 24V 1A 3.00 Each

Process context:

Pattern: Generic R&D
Context: Tape Sensor

Previous processes:

Make Laser Driver (German one chip solution) starting 2013-03-28 ending 2013-03-28

Next processes: