Process: Piezo Stack Z-Axis test starting 2014-01-20 ending 2014-01-20

If you were logged in and working on this process, you would log your work on this page.

Outputs

Scheduled:

Work

Planned Work: (Requirements are ordered by due date)

Work - R&D electronics: 1.00 Time - Hours due Jan. 20, 2014

20/01/2014

Test results: https://docs.google.com/spreadsheet/ccc?key=0AvKN6G919YgndEEyamtKX1ZFU0Zkb1pIUTdFS2hybWc&usp=drive_web#gid=3

The test is being conducted to verify if the piezo stack moves straight on the Z-Axis. Previous results using the 3-axis mechanical assembling showed a movement on both z-axis and XY-plane and that doesn't fit the project requirements.

The test was performed using the Piezo Stack without any mechanical constraint, I've only clamp 1 side of the piezo stack using a vise and clued a fiber at the other side as shown at the test document. The experiment was performed at different positions and the result remained unchanged.

https://www.youtube.com/watch?v=MlGA_94ceNc

Taken by Antonio
Work events:
Jan. 20, 2014 3.27 Time - Hours Done by Antonio

20/01/2014

Test results: https://docs.google.com/spreadsheet/ccc?key=0AvKN6G919YgndEEyamtKX1ZFU0Zkb1pIUTdFS2hybWc&usp=drive_web#gid=3

The test is being conducted to verify if the piezo stack moves straight on the Z-Axis. Previous results using the 3-axis mechanical assembling showed a movement on both z-axis and XY-plane and that doesn't fit the project requirements.

The test was performed using the Piezo Stack without any mechanical constraint, I've only clamp 1 side of the piezo stack using a vise and clued a fiber at the other side as shown at the test document. The experiment was performed at different positions and the result remained unchanged.

https://www.youtube.com/watch?v=MlGA_94ceNc

Usable Inputs

Soldering Iron: 1.00 Each due Jan. 20, 2014
Onhand: Gun soldering iron 1.00 Each
Onhand: Pen soldering iron 1.00 Each
Signal Generator: 1.00 Each due Jan. 20, 2014
Manipulator Actuator - Parts - Mechanical: 1.00 Each due Jan. 20, 2014
Onhand: 288 1.00 Each
Onhand: Piezo buzzer 2.5 kHz 20mm 20.00 Each
Onhand: Piezo buzzer 7.2 kHz 20mm 6.00 Each
Onhand: Piezo buzzer 9 kHz 12mm 10.00 Each
Onhand: Piezo buzzer STD 9kHz 10.00 Each
Onhand: piezo stack 2.00 Each
Onhand: Piezo tube from BPO 1.00 Each
Equipment - Multimeter: 1.00 Each due Jan. 20, 2014
Onhand: Analog multimeter 1.00 Each
Onhand: Talking multimeter 1.00 Each
Prototype Material - Manipulator: 1.00 Each due Jan. 20, 2014

Scheduled: 1.00 Each March 28, 2014

Process context:

Pattern: Electronics R&D
Context: Manipulator - Mantis

Previous processes:

Next processes: